Programme Director, Singapore Centre for 3D Printing (SC3DP)
Associate Chair (Students), School of Mechanical and Aerospace Engineering, NTU
Programme Director (3DP), HP-NTU Digital Manufacturing Corp Lab
New paper published in Advanced Electronic Materials
16 July 2021
The manuscript title is " 3D printing of multi-layered multi-material electronics: a review"
Goh Guo Liang, Zhang Haining, Chong Tzyy Haur, Yeong Wai Yee
New textbook is published in World Scientific Series in 3D printing: Volume 3.
27 May, 2021
The textbook titled " 3D printing and Additive manufacturing of electronics" .
The authors are Chua Chee Kai, Wai Yee Yeong, Hong Yee Low, Tuan Tran, Hong Wei Tan
Our team proudly produced the e-book on AM for COE, NTU
March 31, 2021
New Paper Accepted into Composite Part B: Engineering
March 24, 2021
The paper titled " Additively Manufactured Continuous Carbon Fiber Reinforced Thermoplastic for Topology Optimized Unmanned Aerial Vehicle Structures .
The authors are: Guo Dong Goh, William Toh, Yee Ling Yap, Teng Yong Ng and Wai Yee Yeong
New Paper Accepted into Progress in Material Science
March 22, 2021
The paper titled " Emerging Metallic Systems for Additive Manufacturing: In-situ Alloying and Multi-metal Processing in Laser Powder Bed Fusion.
The authors are: Swee Leong Sing, Sheng Huang, Guo Dong Goh, Guo Liang Goh, Cher Fu Tey, Joel Tan, and Wai Yee Yeong
New Paper Accepted into 3D Printing and Additive Manufacturing
December 7, 2020
The paper titled " High-Resolution Novel Indirect Bioprinting of Low-Viscosity Cell-Laden Hydrogels via Model-Support Bioink Interaction. Bioprinting of unmodified soft extracellular matrix into complex 3D structures has remained challenging to fabricate. Herein, we established a novel process for the printing of low-viscosity hydrogel by using a unique support technique to retain the structural integrity of the support structure. We demonstrated that this process of printing could be used for different types of hydrogel, ranging from fast crosslinking gelatin methacrylate to slow crosslinking collagen type I.
The authors are: Edgar Y.S. Tan, Ratima Suntornnond, and Wai Yee Yeong
Project featured as Namic's success story
December 4, 2020
This project aims to use 3D bioprinting technology to reconstruct the Asian skin model, which closely mimics the biochemical and physiological properties of human skin. The project also aims to develop an Asian skin-on-a-microfluidic plate device to establish a high-throughput screening method, improve productivity and repeatability, and to enable the development of new qualitative measurement protocols.
New Paper Accepted into Acta Materialia
December 2, 2020
The paper titled " Resolving the porosity-unmelted inclusion dilemma during in-situ alloying of Ti34Nb via Laser Powder Bed Fusion. In this paper, we present a mechanism to achieve simultaneous reduction of inclusion content and porosity in in-situ alloyed Ti34Nb samples. Such achievement marks a significant breakthrough in the process optimization of in-situ alloying with LPBF?. A patent based on the study has also been filed High Speed Homogenization And Pore Mitigation Strategy For In-Situ Alloying Via Laser Powder Bed Fusion (LPBF).
The authors are: Sheng Huang, R. Lakshmi Narayan, Joel Heang Kuan Tan, Swee Leong Sing, Wai Yee Yeong
Article recognized as hot paper
November 27, 2020
The article titled Process-Structure-Properties in Polymer Additive Manufacturing via Material Extrusion: A Review published inCritical Reviews in Solid State and Materials Sciences was recognized as a hot paper.This hot paper was published in the past two years and received enough citation to place it in the top 0.1% of the papers in the academic field.
Latest paper accepted for publication in Macromolecular Bioscience
September 28, 2020
The paper titled "Bioprinting of Collagen: Considerations, Potentials and Applications."
Why is it so difficult to print collagen-only bioink? In this article we dived deeper into the issue from a bottom-up approach to find out why bioprinting collagen has shown limited success. Key research areas that would enhance the functionality of bioprinted collagen are highlighted.
The authors are: Jia Min Lee and Wai Yee Yeong
Latest paper accepted for publication in Mechanics of Advanced Materials and Structures
September 15, 2020
The paper titled "Process-structure-property of Additively Manufactured Continuous Carbon Fiber Reinforced Thermoplastic: An Investigation of Mode I Interlaminar Fracture Toughness."
The authors are: Guo Dong Goh, Vishwesh Dikshit, Jia An, and Wai Yee Yeong
Latest book chapter accepted for publication in ASM Handbook, Volume 24: Additive Manufacturing Processes
September 02, 2020
The book chapter titled "Powder Bed Fusion."
The authors are: Swee Leong Sing and Wai Yee Yeong
Research Assistant Professor awarded to Dr Ng Wei Long
July 15, 2020
We are pleased to announce that Dr Ng Wei Long from our HP-NTU Corporate Lab has been awarded the functional title of Research Assistant Professor, under a new NTU research staff scheme. The Research Assistant Professorship (RAP) scheme is targeted at early career researchers in competitive research areas (by nomination only). Wei Long is one of the selected few in this very first batch of awardees.
Please join us in congratulating Wei Long on his new title!
Latest paper accepted for publication in Journal of the Royal Society Interface
July 14, 2020
The paper titled "Engineering macroscale cell alignment through coordinated toolpath design using support-assisted 3D bioprinting."
The authors are: Jia Min Lee and Wai Yee Yeong
Latest paper accepted for publication in Artificial Intelligence Review
July 06, 2020
The paper titled "A review on Machine Learning in 3D printing: Applications, Potential, and Challenges."
The authors are: Guo Dong Goh, Swee Leong Sing, Wai Yee Yeong
Latest paper accepted for publication in Virtual and Physical Prototyping
July 02, 2020
The paper titled "Laser Powder Bed Fusion for Metal Additive Manufacturing: Perspectives on Recent Developments."
The authors are: Swee Leong Sing, Wai Yee Yeong
Latest paper accepted for publication in Rapid Prototyping Journal
June 30, 2020
The paper titled "A review of 3D printing processes and materials for soft robotics."
The authors are: Yee Ling Yap, Swee Leong Sing, Wai Yee Yeong
Latest paper accepted for publication in Anatomy & Cell Biology
June 18, 2020
The paper titled "Development of a three-dimensional printed heart from computed tomography images of a plastinated specimen for learning anatomy."
The authors are: Shairah Radzi, Heang Kuan Joel Tan, Gerald Jit Shen Tan, Wai Yee Yeong, Michael Alan Ferenczi, Naomi Low-Beer, and Sreenivasulu Reddy Mogali
Top downloaded paper in 2018-2019
May 03, 2020
We are excited to share that our research, published in Advanced Materials Interfaces, is among the top 10% most downloaded papers!
Top downloaded paper in 2018-2019
May 03, 2020
We are excited to share that your research, published in Advanced Materials Technologies, is among the top 10% most downloaded papers!
Latest paper accepted for publication in Polymers
April 29, 2020
The paper titled "3D direct printing of silicone meniscus implant using a novel heat-cured extrusion-based printer" has been accepted for publication in Polymers. (Impact Factor: 3.164, Q1, Rank: 17/87 Polymer Science)
The authors are: G. E. Luis Adiwati, H. M. Pan, S. L. Sing, R. Bajpai, J. Song, W. Y. Yeong
Latest paper accepted for publication in Journal of the Mechanical Behavior of Biomedical Materials
April 05, 2020
The paper titled "Laser powder bed fusion of titanium-tantalum alloys: Compositions and designs for biomedical applications" has been accepted for publication in Journal of the Mechanical Behavior of Biomedical Material. (Impact Factor: 3.485, Q1, Engineering, Biomedical, Rank 18/80)
The authors are: Huang Sheng, Swee Leong Sing, Geoffrey deLooze, Robert Wilson, and Wai Yee Yeong
Latest paper accepted for publication in International Journal of Bioprinting
January 21, 2020
The paper titled "Bioprinting of Multimaterials with Computer-aided Design/Computer -aided Manufacturing" has been accepted for publication in International Journal of Bioprinting.
The authors are: Jia Min Lee, Swee Leong Sing, Wai Yee Yeong
Latest paper accepted for publication in 3D Printing and Additive Manufacturing
December 29, 2019
The paper titled "Silicone 3D Printing: Process Optimization, Product Biocompatibility, and Reliability of Silicone Meniscus Implants" has been accepted for publication in 3D Printing and Additive Manufacturing (Impact Factor: 3.259, Q2, Rank 16/49 in Engineering, Manufacturing )
The authors are: Eric Luis, Houwen Matthew Pan, Swee Leong Sing, Anil Kumar Bastola, Guo Dong Goh, Guo Liang Goh, Heang Kuan Joel Tan, Ram Bajpai, Juha Song, and Wai Yee Yeong
Latest paper accepted for publication in Biofabrication
December 08, 2019
The paper titled "Vat polymerization-based bioprinting – process, materials, applications and regulatory challenges" has been accepted for publication in Biofabrication (Impact Factor: 7.236, Q1, Rank 6/80 in Engineering, Biomedical )
The authors are: Ng, Wei Long; Lee, Jia Min; Zhou, Miaomiao; Chen, Yi-Wen; Lee, Kai-Xing Alvin; Yeong, Waiyee; Shen, Yu-Fang
Latest paper accepted for publication in Additive Manufacturing
November 26, 2019
The paper titled "Additive manufacturing of multiple materials by selective laser melting: Ti-alloy to stainless steel via a Cu-alloy interlayer" has been accepted for publication in Additive Manufactuing (Impact Factor: 7.173, Q1, Rank 1/49 in Engineering, Manufacturing )
The authors are: Cher Fu Tey, Xipeng Tan, Swee Leong Sing, Wai Yee Yeong
Congratulations to Swee Leong! We are proud and very happy that he has been selected to attend the the 8th edition of the Global Young Scientists Summit (GYSS) happening in Singapore from 14 to 17 January 2020.
November 03, 2019
The GYSS is a gathering of young researchers worldwide for a chance to interact with eminent scientists and technology leaders. The Summit provides a platform for conversations on science and research, technology innovation and society, and solutions to global challenges.
More information about the submit can be found here:
Latest paper accepted for publication in ACS Applied Materials and Interfaces
October 28, 2019
The paper titled "Aerosol-jet Printed Preferentially Aligned Carbon Nanotube Twin-line for Printed Electronics" has been accepted for publication in ACS Applied Materials and Interfaces (Impact Factor: 8.456, Q1, Rank 16/94 in Nanoscience and Nanotechnology and Q1, Rank 27/293 in Materials Science, Multidisciplinary )
The authors are: Guo Liang, Shweta and Prof Yeong.
Latest paper accepted for publication in Virtual and Physical Prototyping
October 24, 2019
The paper titled "Microstructure modeling for metallic additive manufacturing: a review" has been accepted for publication in Virtual and Physical Prototyping (Impact Factor: 6.825, Q1, Rank 2/49 in Engineering, Manufacturing and Q1, Rank 43/293 in Materials Science, Multidisciplinary )
The authors are: Joel Tan, Swee Leong, and Prof Yeong.
Latest paper accepted for publication in Materials Science and Engineering: A
October 04, 2019
The paper titled "Effect of Solution Heat Treatment on Microstructure and Mechanical Properties of Laser Powder Bed Fusion produced Cobalt-28Chromium-6Molybdenum" has been accepted for publication in Materials Science and Engineering: A (Impact Factor: 4.081, Q1, Rank 68/293 in Materials Science, Multidisciplinary and Q1, Rank 7/76 in Metallurgy & Metallurgical Engineering)
The authors are: Swee Leong, Huang Sheng and Prof Yeong.
Prof Yeong Wai Yee - Winner of the TCT Women in 3D Printing Innovator Award!
September 25, 2019
Fantastic news!
Congrats to Prof Yeong for emerging victorious at the distinguished TCT Awards 2019, held at National Conference Centre in Birmingham, UK.
Kudos to each and every member of the team for your efforts too!
For more information of the TCT awards, please click on this link:
Prof Yeong gave a talk on AM for marine and offshore industry
August 29, 2019
Namic conference series in Marine and offshore industry at Ntuitive NTU as part of Singapore Marine week 2019.
Title: Fundamental of AM
Event details:
Dr Lee Jia Min's presentation at 12th Asia Pacific Burn Congress
August 15, 2019
Awesome job to Dr Lee the great presentation titled: Bioprinting for Burn Management: A Layer at a Time at the 12th Asia Pacific Burn Congress (APBC 2019)!
Please see this link for more info on the event:
We were at SkillsFuture Festival!
July 23, 2019
Prof Yeong was invited to speak at the SkillsFuture Festival to share about the Future of Manufacturing and 3D Printing. It was held at NUS’s University Cultural Centre.
Senior Minister of State, Mr Chee Hong Tat was also present at our sharing as a Guest of Honour!
Vote for Prof Yeong for TCT Women in 3D Printing Innovator award!
July 02, 2019
Heartiest congratulations to Prof Yeong for being nominated as finalist for TCT Women in 3D Printing Innovator award!
Click on this link to cast your vote and show your support:
Thank you!
We are happy to host the students from NRP research program at NTU!
June 30, 2019
Swee Leong gave a talk to the NRP students and have fun showing the latest 3D printing technologies to them.
Nanyang Research Program (NRP) is a premium research program by NTU.
We are proud to announce that VPP has received its first impact factor of 6.825!!
June 20, 2019
2018 impact factor: 6.825
Categories :
(Engineering, Manufacturing – 2/49 Q1)
(Materials Science, Multidisciplinary – 43/293 Q1)
Prof. Yeong is the associate editor for VPP. Clickthe link below to find out more about VPP.
Good luck to Swee Leong and Eric for their semi finals in the business idea competition today !
May 28, 2019
Congrats to both Swee Leong and Eric. We are proud to have two teams selected for semi finals in Nanxun Innovation & Entrepreneurship Challenge 2019.
Latest paper accepted in Nanoscale
May 02, 2019
Congrats to Guo Liang for new paper accepted by Nanoscale! Keep up the good work!
Paper titled: SESSILE DROPLETS CONTAINING CARBON NANOTUBES: A STUDY OF EVAPORATION DYNAMIC AND CNTs ALIGNMENT FOR PRINTED ELECTRONICS
Impact factor of Nanoscale: 7.233, Q1
Calling for new PhD students!!
February 15, 2019
2 new openings for PhD studies!
3D printing for food and pharmaceutical.
3D printing and bioprinting can be applied in 3D printed food, ingestible implant and pharmaceutical compound.
In this project, the students will develop new printing technology and novel printing materials for these emerging applications.
Bioprinting and tissue engineering via microfluidics technology
In this project, an ultrafine microfluidics system will be utilized to deposit biomaterials and cells.
The project includes developing the governing physics of cell jetting, formulation of materials for microfluidics printing and also developing a proof of concept tissue printing applications.
This is an interdisciplinary project involving physics, materials, cell culture and tissue engineering.
Latest paper accepted in Journal of Sandwich Structures and Materials
February 14, 2019
Congrats to Vishwesh, Guo Dong, and Shweta for new paper accepted by Journal of Sandwich Structures and Materials! Keep up the good work!
Paper titled "Quasi-Static Indentation Analysis on Three-Dimensional (3D) Printed Continuous-Fiber Sandwich Composites".
Latest paper accepted in Applied Physics Reviews
February 14, 2019
Congrats to Jia Min and Wei long for new paper accepted by Applied Physics Reviews! Keep up the good work!
Paper titled "Resolution and shape in bioprinting: strategizing towards complex tissue and organ printing".
Impact factor of Applied Physics Reviews: 12.894, Q1 journal.
Our research work is featured in 3DPrintingIndustry.com!
January 07, 2019
Researchers from the Singapore Centre for 3D Printing School of Mechanical and Aerospace Engineering Nanyang Technological University have published a review summarising research on carbon nanotubes (CNT) and their use in 3D printing.
The research paper titled, Directed and On-Demand Alignment of Carbon Nanotube: A Review toward 3D Printing of Electronics, categorizes the alignment methods of carbon nanotubes and summarizes various applications of the material. Furthermore, the paper discusses how the material has been used to develop improved composites and how it can contribute to the development of future devices using 3D printing....
Find out more about the article using the link below.
Latest paper accepted by ACS Sensors
December 17, 2018
Congrats to Shweta, Guo Liang, and Zhen Kai for new paper accepted by ACS Sensors! Keep up the good work!
Paper titled "Wearable Bandage based Strain Sensor for Home Healthcare: Combining 3D Aerosol Jet Printing and Laser Sintering". (Impact factor of ACS Sensors: 5.711, Q1 journal.)
The paper is available at link below:
Latest paper accepted by Advanced Materials Interfaces
December 11, 2018
Congrats to Guo Liang and Shweta for new paper accepted by Advanced Materials Interfaces! Keep up the good work!
Paper titled "Directed and On-demand Alignment of Carbon Nanotube: A Review Towards 3D Printing of Electronics".
The paper is available at link below:
Latest paper accepted by Critical Reviews in Solid state and Materials Sciences
November 15, 2018
Congrats to Guo Dong, Swee Leong, Joel, Guo Liang and Yee Ling for new paper accepted by Critical Reviews in Solid state and Materials Sciences! Keep up the good work!
Paper titled "Process-structure-properties in Polymer Additive Manufacturing via Material Extrusion: A review". available at
Our research work is featured in 3DPrint.com!
November 12, 2018
The article title reads, "Adjusting the Design, Material, and Parameters of a 3D Printed Strain Gauge with Computational Simulation".
A trio of researchers from the Singapore Center for 3D Printing at Nanyang Technological Universityrecently published a paper, titled “Aerosol Jet Printed Strain Sensor: Simulation Studies Analyzing the Effect of Dimension and Design on Performance,” about their work in using computational simulation to adjust the design, material, and parameters of a 3D printed strain gauge made with aerosol jet technology...
Find out more about the article using the link below.
Giving a 3D printing workshop on inaugural Transform MedEd oconference jointly organised by LKC-imperial college
November 08, 2018
Congratulations to Swee Leong for publishing a book!
October 01, 2018
Book Title: Selective Laser Melting of Novel Titanium-Tantalum Alloy as Orthopaedic Biomaterial
Available at:
Featured project at CSIRO ASEAN HUB launching event
September 26, 2018
In-situ alloying using SLM and DED was selected as one of the projects highlighted during the CSIRO ASEAN Hub launch event (17 September 2018). The hub facilitates CSIRO's science, commercial and research for development engagements across Singapore, Indonesia, Vietnam, Thailand, Malaysia and Philippines.
TechInnovation 2018
September 26, 2018
In-situ alloying using SLM was featured at NTUititve's booth at the event (18-19 September 2018).
This technology is offered on IPI SG.
Latest paper accepted by Advanced Materials Technologies
August 15, 2018
Congrats to Guo Dong, Shweta, Yee Ling for new paper accepted by Advanced Materials Technologies! Keep up the good work!
Paper titled "Recent progress in Additive Manufacturing of Fiber Reinforced Polymer Composite"
Invited talk at the 20th Annual SME Conference
August 13, 2018
Prof Yeong will be giving a talk at the conference on 15 August 2018, organised by Singapore Chinese Chamber of Commerce and Industry.
Topic: "How to be a smart factory of tomorrow"
Click the link below for more information.
Latest paper accepted by International Journal of Refractory Metals and Hard Materials
August 12, 2018
Congrats to Swee Leong for new paper accepted by International Journal of Refractory Metals and Hard Materials! Keep up the good work!
Paper titled "Selective laser melting of titanium alloy with 50 wt% tantalum: Effect of laser process parameters on part quality".
Prof Yeong and team is happy to be shortlisted for the Science award by Lush Prize 2018
August 07, 2018
The Lush Prize is a major initiative aiming to bring forward the day when safety testing takes place without the use of animals.
This year 56 projects and scientists from 17 countries made it through to the final judging process.
Check out The Lush Prize website below for more info.
Showcasing our technology to the PM of India
May 31, 2018
Our work on 3D Printing was selected as one of the most promising upcoming technologies, to be showcased to Prime Minister of India, His Excellency Narendra Modi, on his visit to NTU on 1 June 2018.
Dr. Shweta exhibited the innovations in 3D printing technology.
Just accepted paper in MRS Advances
May 16, 2018
We have a new publication on Bioelectronics “3D printed Bioelectronics Platform with Embedded Electronics” in MRS Advances. Congrats to Dr. Shweta and team.
Available online at:
We were at LKCMedicine Anatomy Challenge 2018!
April 20, 2018
Thank you Lee Kong Chian School of Medicine for inviting us to this event. We had a great time sharing our knowledge and experiences with 3D printed biomodels with the participants and students!
Click on the link below to visit their FB page:
Channels News Asia (CNA) showcased our 3D printed multi-material biomodel technology!
March 13, 2018
Challenge Tomorrow, a documentary series on Channel News Asia, presented our specially designed and fabricated multi-material biomodel on their latest episode!
As a project done with Lee Kong Chian Medical School, we 3D printed biomodels to replace the use of cadavers in the training and education of future doctors to a great success!
The Straits Times featured our bioprinting technology of pigmented skin.
March 01, 2018
Congrats to Wei Long for getting featured on Straits Times for his 3D printed skin innovation. Article titled "NTU scientists print human skin that matches natural pigment" is published on 2 March 2018.
Our latest paper on bioprinted photoreceptor-retinal tissue model will be published soon
February 20, 2018
Congrats to Pu Jiang and Edgar! Article “A bilayer photoreceptor-retinal tissue model with gradient cell density design: a study of microvalve-based bioprinting” is accepted into Journal of Tissue Engineering and Regenerative Medicine
This is a work in collaboration with Tan Tock Seng Hospital and funded by NTU-NHG aging grant.
Latest paper accepted in British Journal of Ophthalmology
February 04, 2018
Article: Tissue engineering of Retina and Bruch’s Membrane: A review of Cells, Materials and Processes
This journal was launched in 1917! We are very proud to be part of the history of this journal.
Congratulation to Edgar and Pu Jiang for the good work done!
Congratulations Yu Jun on defending her thesis successfully today! Well done. Dr Tan!
January 07, 2018
Latest paper accepted in Sensors and Actuators B: Chemical.
December 19, 2017
Article: A Low Cost and Flexible Carbon Nanotube pH Sensor fabricated using Aerosol Jet Technology for Live Cell Applications.
The impact factor of Sensors and Actuators B: Chemical is 5.401.
Congratulations to Guo Liang, Shweta and Yu Jun for the good work!
Swee Leong’s thesis has been selected for the Springer Theses Award!
December 05, 2017
Congratulations! The thesis will now be published in the collection of outstanding dissertations Springer Theses. Each thesis is chosen for its scientific excellence and impact on research. It provides an accredited documentation of the valuable contributions made by today’s younger generation of scientists. More information about the award can be found via the link below.
Our team presented at FutureHealth 2017 on 10 NOV 2017
November 09, 2017
Latest paper accepted in Biosensors and Bioelectronics
November 06, 2017
Article: A novel 3D bioprinted flexible and biocompatible hydrogel bioelectronic platform will be published in Biosensors and Bioelectronics.
The impact factor of Biosensors and Bioelectronics is 7.78.
Congratulations to Shewta, Jia Min and Wei Long for the good work!
Two papers accepted in Materials and Design!
October 05, 2017
Wonderful news!
2 research papers have been accepted for publication in Materials and Design journal.
They are:
"Crack Monitoring and Failure Investigation on Inkjet Printed Sandwich Structures Under Quasi-Static Indentation Test"
and
"Characterization of mechanical properties and fracture mode of additively manufactured carbon fibre and glass fibre reinforced thermoplastics"
Congratulations to Guo Dong, Guo Liang, Yee Ling, Shweta and Swee Leong for the great work!!
Latest paper accepted in International Journal of Advanced Manufacturing Technology
August 13, 2017
Research paper titled "Additively Manufactured Multi-material Free-form Structure with Printed Electronics" has been accepted for publication in International Journal of Advanced Manufacturing Technology.
Congrats to Guo Liang, Dr. Shweta, Guo Dong, Joel, Dr. Zhao and Dr. Chuah, a new paper in IJAMT ! 👍!
Congrats Dr Sing Swee Leong for graduating as the best MAE PhD thesis winner 2017!
July 30, 2017
Dr Sing has emerged as the winner of the NTU School of Mechanical and Aerospace PhD best thesis award for 2017. He had graduated under the guidance of Prof Yeong.
Congratulations to both!
You may access Dr Sing's thesis via the link below:
We were at SC3DP booth at NAMIC Healthcare Summit
July 20, 2017
We had a fantastic time sharing the potential application of latest 3D printing technologies with our friends from the healthcare industry! The Guest-of-Honour, Mr Amrin Amin, Parliamentary Secretary, Ministry of Home Affairs were also present on that day!
Hot paper in Trends in Biotechnology
July 17, 2017
Congrats to Wei Long for a hot paper in web of science.
Skin Bioprinting: Impending Reality or Fantasy?
By: Ng, Wei Long; Wang, Shuai; Yeong, Wai Yee; et al.
TRENDS IN BIOTECHNOLOGY Volume: 34 Issue: 9 Special Issue: SI Pages: 689-699 Published: SEP 2016
Times Cited: 14
(from Web of Science Core Collection)
Hot Paper
This hot paper was published in the past two years and received enough citations in March/April 2017 to place it in the top 0.1% of papers in the academic field of Biology & Biochemistry.
Latest paper accepted in International Journal of Bioprinting
July 10, 2017
Research paper titled "Hybrid Three-Dimensional (3D) Bioprinting of Retina Equivalent for Ocular Research" has been accepted for publication in International Journal of Bioprinting.
Congrats to Pu Jiang and Edgar , a new paper in IJB ! 👍!
Latest paper accepted in Q1 Robotics and Computer Integrated Manufacturing
July 03, 2017
Research paper titled "Selective laser melting of lattice structures: A statistical approach to manufacturability and mechanical behavior " has been accepted for publication in Robotics and Computer Integrated Manufacturing journal.
Congratulations to Swee Leong and team!
Research paper accepted in the Journal of Materials Chemistry B
June 19, 2017
Congratulations to Edgar and team!
They have successfully published an article - titled "Novel method for fabrication Ultrathin, Free-Standing and Porous Polymer Membranes for Retinal Tissue Engineering" - in the Journal of Materials Chemistry B!
Latest paper accepted in Q1 Precision Engineering - Journal of the International Societies for Precision Engineering and Nanotechnology
May 22, 2017
Research paper titled "Material jetting additive manufacturing: An experimental study using designed metrological benchmarks." has been accepted for publication in Precision Engineering journal.
Congratulations to Yee Ling and team!
Highly cited paper in web-of-science!
May 10, 2017
Congrats to Jia Min for a highly cited paper in web-of-science !
Characterization and evaluation of 3D printed microfluidic chip for cell processing
By: Lee, Jia Min; Zhang, Meng; Yeong, Wai Yee
MICROFLUIDICS AND NANOFLUIDICS Volume: 20 Issue: 1 Article Number: 5 Published: JAN 2016
As of November/December 2016, this highly cited paper received enough citations to place it in the top 1% of the academic field of Engineering based on a highly cited threshold for the field and publication year.
New Q1 paper accepted in Anatomical Sciences Education!
March 06, 2017
Congrats to Joel! A paper in Anatomical Sciences Education accepted!
Article:
Evaluation by medical students of the educational value of multi-material and multi-colored three dimensional (3D) printed model of the upper limb for anatomical education
Highly cited paper in International Journal of Heat and Mass Transfer
April 02, 2017
Numerical investigation and an effective modelling on the Selective Laser Melting (SLM) processwith aluminium alloy 6061
By: Loh, Loong-Ee; Chua, Chee-Kai; Yeong, Wai-Yee; et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER Volume: 80 Pages: 288-300 Published: JAN 2015
As of November/December 2016, this highly cited paper received enough citations to place it in the top 1% of the academic field of Engineering based on a highly cited threshold for the field and publication year.
New paper accepted in Rapid Prototyping Journal!
March 06, 2017
Congrats to Yee Ling, Edgar, Joel, and Zhen Kai! A paper in Rapid Prototyping Journal accepted!
Article:
3D Printed Bio-models for Medical Applications
New paper accepted in Materials journal!
March 05, 2017
Congrats to Yee Ling! A paper in Materials accepted!
Article:
Investigation of quasi-static indentation response of inkjet printed sandwich structures under various indenter geometries
PDF Version:
New Q1 Paper Accepted in Materials
February 16, 2017
Congrats to Wei Long! A paper in Materials accepted!
Article titled: Polyvinylpyrrolidone-based bio-ink improves cell viability and homogeneity during drop-on-demand printing
Highly cited paper in Materials Science
February 03, 2017
As of September/October 2016, this highly cited paper received enough citations to place it in the top 1% of the academic field of Materials Science based on highly cited threshold for the field and publication year.
Article title:
Selective laser melting of titanium alloy with 50wt% tantalum: Microstructure and mechanical properties
By: Sing, Swee Leong, Wai Yee Yeong, and Florencia Edith Wiria. Journal of Alloys and Compounds 660 (2016): 461-470.
Highly cited paper in Clinical Medicine
January 21, 2017
As of September/October 2016, this highly-cited paper received enough citations to place it in the top 1% of the academic field of Clinical Medicine based on a highly cited threshold for the field and publication year.
Article title:
Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and design
By: Sing, Swee Leong, Jia An, Wai Yee Yeong, and Florencia Edith Wiria et. al. Journal of Orthopaedic Research 34, no. 3 (2016): 369-385.
New Paper Accepted into Biomaterials Science
January 21, 2017
Congrats to Wei Long and Jia Min! A paper in Biomaterials Science accepted!
Article titled:
Microvalve-based bioprinting-process, bio-inks and applications
Latest Paper Accepted into Aerospace Science and Technology
December 28, 2016
Congratulations to Guo Dong and team! For publishing in Q1 journal Aerospace Science and Technology.
Article titled:
Additive Manufacturing in Unmanned Aerial Vehicles (UAVs): Challenges and Potential.