Our team proudly produced the e-book on AM for COE, NTU

Our team proudly produced the e-book on AM for COE, NTU

March 31, 2021

New Paper Accepted into Composite Part B: Engineering

New Paper Accepted into Composite Part B: Engineering

March 24, 2021

The paper titled " Additively Manufactured Continuous Carbon Fiber Reinforced Thermoplastic for Topology Optimized Unmanned Aerial Vehicle Structures .�

The authors are: Guo Dong Goh, William Toh, Yee Ling Yap, Teng Yong Ng and Wai Yee Yeong

New Paper Accepted into Progress in Material Science

New Paper Accepted into Progress in Material Science

March 22, 2021

The paper titled " Emerging Metallic Systems for Additive Manufacturing: In-situ Alloying and Multi-metal Processing in Laser Powder Bed Fusion.

The authors are: Swee Leong Sing, Sheng Huang, Guo Dong Goh, Guo Liang Goh, Cher Fu Tey, Joel Tan, and Wai Yee Yeong

Certificate of Excellence in Reviewing awarded to Huang Sheng

Certificate of Excellence in Reviewing awarded to Huang Sheng

March 11, 2021

Congrats to Huang Sheng for being awarded the certificate of Excellence in reviewing for his significant contribution made to the quality of Acta Materialia.

New Paper Accepted into International Journal of Bioprinting

New Paper Accepted into International Journal of Bioprinting

December 7, 2020

The paper titled " Fabrication and Characterization of 3D Bioprinted Triple-layered Human Alveolar Lung Models.

The authors are: Wei Long Ng, Swee Leong Sing, and Wai Yee Yeong

New Paper Accepted into 3D Printing and Additive Manufacturing

New Paper Accepted into 3D Printing and Additive Manufacturing

December 7, 2020

The paper titled " High-Resolution Novel Indirect Bioprinting of Low-Viscosity Cell-Laden Hydrogels via Model-Support Bioink Interaction. Bioprinting of unmodified soft extracellular matrix into complex 3D structures has remained challenging to fabricate. Herein, we established a novel process for the printing of low-viscosity hydrogel by using a unique support technique to retain the structural integrity of the support structure. We demonstrated that this process of printing could be used for different types of hydrogel, ranging from fast crosslinking gelatin methacrylate to slow crosslinking collagen type I.

The authors are: Edgar Y.S. Tan, Ratima Suntornnond, and Wai Yee Yeong

Project featured as Namic's success story

Project featured as Namic's success story

December 4, 2020

This project aims to use 3D bioprinting technology to reconstruct the Asian skin model, which closely mimics the biochemical and physiological properties of human skin. The project also aims to develop an Asian skin-on-a-microfluidic plate device to establish a high-throughput screening method, improve productivity and repeatability, and to enable the development of new qualitative measurement protocols.

New Paper Accepted into Acta Materialia

New Paper Accepted into Acta Materialia

December 2, 2020

The paper titled " Resolving the porosity-unmelted inclusion dilemma during in-situ alloying of Ti34Nb via Laser Powder Bed Fusion. In this paper, we present a mechanism to achieve simultaneous reduction of inclusion content and porosity in in-situ alloyed Ti34Nb samples. Such achievement marks a significant breakthrough in the process optimization of in-situ alloying with LPBF?. A patent based on the study has also been filed High Speed Homogenization And Pore Mitigation Strategy For In-Situ Alloying Via Laser Powder Bed Fusion (LPBF).

The authors are: Sheng Huang, R. Lakshmi Narayan, Joel Heang Kuan Tan, Swee Leong Sing, Wai Yee Yeong

Article recognized as hot paper

Article recognized as hot paper

November 27, 2020

The article titled Process-Structure-Properties in Polymer Additive Manufacturing via Material Extrusion: A Review published inCritical Reviews in Solid State and Materials Sciences was recognized as a hot paper.This hot paper was published in the past two years and received enough citation to place it in the top 0.1% of the papers in the academic field.

Latest paper accepted for publication in Macromolecular Bioscience

Latest paper accepted for publication in Macromolecular Bioscience

September 28, 2020

The paper titled "Bioprinting of Collagen: Considerations, Potentials and Applications."​

Why is it so difficult to print collagen-only bioink? In this article we dived deeper into the issue from a bottom-up approach to find out why bioprinting collagen has shown limited success. Key research areas that would enhance the functionality of bioprinted collagen are highlighted.

The authors are: Jia Min Lee and Wai Yee Yeong

Latest paper accepted for publication in Mechanics of Advanced Materials and Structures

Latest paper accepted for publication in Mechanics of Advanced Materials and Structures

September 15, 2020

The paper titled "Process-structure-property of Additively Manufactured Continuous Carbon Fiber Reinforced Thermoplastic: An Investigation of Mode I Interlaminar Fracture Toughness."

The authors are: Guo Dong Goh, Vishwesh Dikshit, Jia An, and Wai Yee Yeong

Latest book chapter accepted for publication in ASM Handbook, Volume 24: Additive Manufacturing Processes

Latest book chapter accepted for publication in ASM Handbook, Volume 24: Additive Manufacturing Processes

September 02, 2020

The book chapter titled "Powder Bed Fusion."

The authors are: Swee Leong Sing and Wai Yee Yeong

NTU Presidential post-doc fellowship awarded to Dr Sing Swee Leong

NTU Presidential post-doc fellowship awarded to Dr Sing Swee Leong

August 05, 2020

Congratulations to Dr Sing Swee Leong on his NTU Presidential Post-Doc Fellowship 2020 award. He will be able to conduct independent research as a Presidential Postdoctoral Fellow for 2 years.

Research Assistant Professor awarded to Dr Ng Wei Long

Research Assistant Professor awarded to Dr Ng Wei Long

July 15, 2020

We are pleased to announce that Dr Ng Wei Long from our HP-NTU Corporate Lab has been awarded the functional title of Research Assistant Professor, under a new NTU research staff scheme. The Research Assistant Professorship (RAP) scheme is targeted at early career researchers in competitive research areas (by nomination only). Wei Long is one of the selected few in this very first batch of awardees.

Please join us in congratulating Wei Long on his new title!

Latest paper accepted for publication in Journal of the Royal Society Interface

Latest paper accepted for publication in Journal of the Royal Society Interface

July 14, 2020

The paper titled "Engineering macroscale cell alignment through coordinated toolpath design using support-assisted 3D bioprinting."

The authors are: Jia Min Lee and Wai Yee Yeong

Latest paper accepted for publication in Artificial Intelligence Review

Latest paper accepted for publication in Artificial Intelligence Review

July 06, 2020

The paper titled "A review on Machine Learning in 3D printing: Applications, Potential, and Challenges."

The authors are: Guo Dong Goh, Swee Leong Sing, Wai Yee Yeong

Latest paper accepted for publication in Virtual and Physical Prototyping

Latest paper accepted for publication in Virtual and Physical Prototyping

July 02, 2020

The paper titled "Laser Powder Bed Fusion for Metal Additive Manufacturing: Perspectives on Recent Developments."

The authors are: Swee Leong Sing, Wai Yee Yeong

Latest paper accepted for publication in Rapid Prototyping Journal

Latest paper accepted for publication in Rapid Prototyping Journal

June 30, 2020

The paper titled "A review of 3D printing processes and materials for soft robotics."

The authors are: Yee Ling Yap, Swee Leong Sing, Wai Yee Yeong

Latest paper accepted for publication in Anatomy & Cell Biology

Latest paper accepted for publication in Anatomy & Cell Biology

June 18, 2020

The paper titled "Development of a three-dimensional printed heart from computed tomography images of a plastinated specimen for learning anatomy."

The authors are: Shairah Radzi, Heang Kuan Joel Tan, Gerald Jit Shen Tan, Wai Yee Yeong, Michael Alan Ferenczi, Naomi Low-Beer, and Sreenivasulu Reddy Mogali

Top downloaded paper in 2018-2019

Top downloaded paper in 2018-2019

May 03, 2020

We are excited to share that our research, published in Advanced Materials Interfaces, is among the top 10% most downloaded papers!

Top downloaded paper in 2018-2019

Top downloaded paper in 2018-2019

May 03, 2020

We are excited to share that your research, published in Advanced Materials Technologies, is among the top 10% most downloaded papers!

Latest paper accepted for publication in Polymers

Latest paper accepted for publication in Polymers

April 29, 2020

The paper titled "3D direct printing of silicone meniscus implant using a novel heat-cured extrusion-based printer" has been accepted for publication in Polymers. (Impact Factor: 3.164, Q1, Rank: 17/87 Polymer Science)

The authors are: G. E. Luis Adiwati, H. M. Pan, S. L. Sing, R. Bajpai, J. Song, W. Y. Yeong

Congrats to Guo Dong for your successful defence!

Congrats to Guo Dong for your successful defence!

April 06, 2020

Good job to Guo Dong and congrats.

TItle: Process-structure-property of additively manufactured continuous carbon fiber reinforced thermoplastic composite

Latest paper accepted for publication in Journal of the Mechanical Behavior of Biomedical Materials

Latest paper accepted for publication in Journal of the Mechanical Behavior of Biomedical Materials

April 05, 2020

The paper titled "Laser powder bed fusion of titanium-tantalum alloys: Compositions and designs for biomedical applications" has been accepted for publication in Journal of the Mechanical Behavior of Biomedical Material. (Impact Factor: 3.485, Q1, Engineering, Biomedical, Rank 18/80)

The authors are: Huang Sheng, Swee Leong Sing, Geoffrey deLooze, Robert Wilson, and Wai Yee Yeong

Congrats to Guo Liang for your successful defence!

Congrats to Guo Liang for your successful defence!

January 22, 2020

Good job to Guo Liang and congrats.

TItle: Aligning carbon nanotubes via Aerosol Jet Printing for printable Electronics

Latest paper accepted for publication in International Journal of Bioprinting

Latest paper accepted for publication in International Journal of Bioprinting

January 21, 2020

The paper titled "Bioprinting of Multimaterials with Computer-aided Design/Computer -aided Manufacturing" has been accepted for publication in International Journal of Bioprinting.

The authors are: Jia Min Lee, Swee Leong Sing, Wai Yee Yeong


Latest paper accepted for publication in 3D Printing and Additive Manufacturing


Latest paper accepted for publication in 3D Printing and Additive Manufacturing

December 29, 2019

The paper titled "Silicone 3D Printing: Process Optimization, Product Biocompatibility, and Reliability of Silicone Meniscus Implants" has been accepted for publication in 3D Printing and Additive Manufacturing (Impact Factor: 3.259, Q2, Rank 16/49 in Engineering, Manufacturing )

The authors are: Eric Luis, Houwen Matthew Pan, Swee Leong Sing, Anil Kumar Bastola, Guo Dong Goh, Guo Liang Goh, Heang Kuan Joel Tan, Ram Bajpai, Juha Song, and Wai Yee Yeong

Latest paper accepted for publication in Biofabrication

Latest paper accepted for publication in Biofabrication

December 08, 2019

The paper titled "Vat polymerization-based bioprinting – process, materials, applications and regulatory challenges" has been accepted for publication in Biofabrication (Impact Factor: 7.236, Q1, Rank 6/80 in Engineering, Biomedical )

The authors are: Ng, Wei Long; Lee, Jia Min; Zhou, Miaomiao; Chen, Yi-Wen; Lee, Kai-Xing Alvin; Yeong, Waiyee; Shen, Yu-Fang

Latest paper accepted for publication in Additive Manufacturing

Latest paper accepted for publication in Additive Manufacturing

November 26, 2019

The paper titled "Additive manufacturing of multiple materials by selective laser melting: Ti-alloy to stainless steel via a Cu-alloy interlayer" has been accepted for publication in Additive Manufactuing (Impact Factor: 7.173, Q1, Rank 1/49 in Engineering, Manufacturing )

The authors are: Cher Fu Tey, Xipeng Tan, Swee Leong Sing, Wai Yee Yeong

Congratulations to Cher Fu for passing his PhD oral defence!

Congratulations to Cher Fu for passing his PhD oral defence!

November 20, 2019

Title: Additive Manufacturing of Multiple materials by selective laser melting: Ti-alloy to stainless steel via a Cu-alloy interlayer

Invited talk at KU Leuven by Prof Yeong

Invited talk at KU Leuven by Prof Yeong

November 14, 2019

Visiting the AM group at KU Leuven and meeting Prof Kruth.

Congratulations to Swee Leong! We are proud and very happy that he has been selected to attend the the 8th edition of the Global Young Scientists Summit (GYSS) happening in Singapore from 14 to 17 January 2020.

Congratulations to Swee Leong! We are proud and very happy that he has been selected to attend the the 8th edition of the Global Young Scientists Summit (GYSS) happening in Singapore from 14 to 17 January 2020.

November 03, 2019

The GYSS is a gathering of young researchers worldwide for a chance to interact with eminent scientists and technology leaders. The Summit provides a platform for conversations on science and research, technology innovation and society, and solutions to global challenges.

More information about the submit can be found here:

Latest paper accepted for publication in ACS Applied Materials and Interfaces

Latest paper accepted for publication in ACS Applied Materials and Interfaces

October 28, 2019

The paper titled "Aerosol-jet Printed Preferentially Aligned Carbon Nanotube Twin-line for Printed Electronics" has been accepted for publication in ACS Applied Materials and Interfaces (Impact Factor: 8.456, Q1, Rank 16/94 in Nanoscience and Nanotechnology and Q1, Rank 27/293 in Materials Science, Multidisciplinary )

The authors are: Guo Liang, Shweta and Prof Yeong.

Latest paper accepted for publication in Virtual and Physical Prototyping

Latest paper accepted for publication in Virtual and Physical Prototyping

October 24, 2019

The paper titled "Microstructure modeling for metallic additive manufacturing: a review" has been accepted for publication in Virtual and Physical Prototyping (Impact Factor: 6.825, Q1, Rank 2/49 in Engineering, Manufacturing and Q1, Rank 43/293 in Materials Science, Multidisciplinary )

The authors are: Joel Tan, Swee Leong, and Prof Yeong.

Congratulations to Eric for passing his PhD oral defence!

Congratulations to Eric for passing his PhD oral defence!

October 09, 2019

itle: 3-D Direct Printing of Silicone Meniscus Using A Novel Heat-Curing Extrusion Based Silicone Printer

Co. Supervisor: Song Ju Ha

Congratulations to Huang Sheng for passing QE

Congratulations to Huang Sheng for passing QE

October 07, 2019

QE title: Selective Laser Melting Of Highly Textured Ti‐Nb Alloy via In‐situ Alloying and Its Mechanism of Fracture and Fatigue

Latest paper accepted for publication in Materials Science and Engineering: A

Latest paper accepted for publication in Materials Science and Engineering: A

October 04, 2019

The paper titled "Effect of Solution Heat Treatment on Microstructure and Mechanical Properties of Laser Powder Bed Fusion produced Cobalt-28Chromium-6Molybdenum" has been accepted for publication in Materials Science and Engineering: A (Impact Factor: 4.081, Q1, Rank 68/293 in Materials Science, Multidisciplinary and Q1, Rank 7/76 in Metallurgy & Metallurgical Engineering)

The authors are: Swee Leong, Huang Sheng and Prof Yeong.

Prof Yeong Wai Yee - Winner of the TCT Women in 3D Printing Innovator Award!

Prof Yeong Wai Yee - Winner of the TCT Women in 3D Printing Innovator Award!

September 25, 2019

Fantastic news!

Congrats to Prof Yeong for emerging victorious at the distinguished TCT Awards 2019, held at National Conference Centre in Birmingham, UK.

Kudos to each and every member of the team for your efforts too!

For more information of the TCT awards, please click on this link:

Congrats to Dr. Edgar Tan for your successful defence!

Congrats to Dr. Edgar Tan for your successful defence!

September 18, 2019

Good job to Edgar and congrats

Prof Yeong gave a talk on AM for marine and offshore industry

Prof Yeong gave a talk on AM for marine and offshore industry

August 29, 2019

Namic conference series in Marine and offshore industry at Ntuitive NTU as part of Singapore Marine week 2019.

Title: Fundamental of AM

Event details:

Dr Lee Jia Min's presentation at 12th Asia Pacific Burn Congress

Dr Lee Jia Min's presentation at 12th Asia Pacific Burn Congress

August 15, 2019

Awesome job to Dr Lee the great presentation titled: Bioprinting for Burn Management: A Layer at a Time at the 12th Asia Pacific Burn Congress (APBC 2019)!

Please see this link for more info on the event:

We were at SkillsFuture Festival!

We were at SkillsFuture Festival!

July 23, 2019

Prof Yeong was invited to speak at the SkillsFuture Festival to share about the Future of Manufacturing and 3D Printing. It was held at NUS’s University Cultural Centre.

Senior Minister of State, Mr Chee Hong Tat was also present at our sharing as a Guest of Honour!

Great Bioprinting Workshop with summer course students, thank you to Cellink !

Great Bioprinting Workshop with summer course students, thank you to Cellink !

July 14, 2019

Congratulations to Eric for getting outstanding award in the innovation competition at Nanxun, China

Congratulations to Eric for getting outstanding award in the innovation competition at Nanxun, China

July 11, 2019

Vote for Prof Yeong for TCT Women in 3D Printing Innovator award!

Vote for Prof Yeong for TCT Women in 3D Printing Innovator award!

July 02, 2019

Heartiest congratulations to Prof Yeong for being nominated as finalist for TCT Women in 3D Printing Innovator award!

Click on this link to cast your vote and show your support:

Thank you!

We are happy to host the students from NRP research program at NTU!

We are happy to host the students from NRP research program at NTU!

June 30, 2019

Swee Leong gave a talk to the NRP students and have fun showing the latest 3D printing technologies to them.

Nanyang Research Program (NRP) is a premium research program by NTU.

All the best for Joel in your next endeavour!

All the best for Joel in your next endeavour!

June 24, 2019

We had group meeting and also cross sharing sessions with professor and students from Asia University, Taiwan.

Also, a farewell for our esteemed member of the team, Joel. Thank you for your great help and good luck for your next endeavour!

Latest paper accepted for publication in BMC Medical Education

Latest paper accepted for publication in BMC Medical Education

June 19, 2019

Congrats to Joel and Prof Yeong for new paper accepted by BMC Medical Education! Keep up the good work!

Paper titled: Multi-material Three Dimensional Printed Models for Simulation of Bronchoscopy

We are proud to announce that VPP has received its first impact factor of 6.825!!

We are proud to announce that VPP has received its first impact factor of 6.825!!

June 20, 2019

2018 impact factor: 6.825

Categories :

(Engineering, Manufacturing – 2/49 Q1)
(Materials Science, Multidisciplinary – 43/293 Q1)



Prof. Yeong is the associate editor for VPP. Clickthe link below to find out more about VPP.

Good luck to Swee Leong and Eric for their semi finals in the business idea competition today !

Good luck to Swee Leong and Eric for their semi finals in the business idea competition today !

May 28, 2019

Congrats to both Swee Leong and Eric. We are proud to have two teams selected for semi finals in Nanxun Innovation & Entrepreneurship Challenge 2019.

Latest paper accepted in Nanoscale

Latest paper accepted in Nanoscale

May 02, 2019

Congrats to Guo Liang for new paper accepted by Nanoscale! Keep up the good work!

Paper titled: SESSILE DROPLETS CONTAINING CARBON NANOTUBES: A STUDY OF EVAPORATION DYNAMIC AND CNTs ALIGNMENT FOR PRINTED ELECTRONICS

Impact factor of Nanoscale: 7.233, Q1

Latest paper accepted in Tissue Engineering Part B:Reviews

Latest paper accepted in Tissue Engineering Part B:Reviews

April 25, 2019

Congrats to Wei Long for new paper accepted by Tissue Engineering Part B:Reviews! Keep up the good work!

Visit to CSIRO

Visit to CSIRO

March 01, 2019

Our team attended a work visit to Commonwealth Scientific and Industrial Research Organisation (CSIRO) at Australia. It was a fruitful and fulfilling trip!


Group sharing and gathering session


Group sharing and gathering session

February 24, 2019

We had a great time at our group sharing and gathering! Thank you prof for the sumptuous buffet!

Also, thank you and farewell to Dr Shweta. Good luck in your next endeavour in Denmark!

Calling for new PhD students!!

Calling for new PhD students!!

February 15, 2019

2 new openings for PhD studies!

3D printing for food and pharmaceutical.

3D printing and bioprinting can be applied in 3D printed food, ingestible implant and pharmaceutical compound.

In this project, the students will develop new printing technology and novel printing materials for these emerging applications.

Bioprinting and tissue engineering via microfluidics technology

In this project, an ultrafine microfluidics system will be utilized to deposit biomaterials and cells.

The project includes developing the governing physics of cell jetting, formulation of materials for microfluidics printing and also developing a proof of concept tissue printing applications.

This is an interdisciplinary project involving physics, materials, cell culture and tissue engineering.

Latest paper accepted in Journal of Sandwich Structures and Materials

Latest paper accepted in Journal of Sandwich Structures and Materials

February 14, 2019

Congrats to Vishwesh, Guo Dong, and Shweta for new paper accepted by Journal of Sandwich Structures and Materials! Keep up the good work!

Paper titled "Quasi-Static Indentation Analysis on Three-Dimensional (3D) Printed Continuous-Fiber Sandwich Composites".

Latest paper accepted in Applied Physics Reviews

Latest paper accepted in Applied Physics Reviews

February 14, 2019

Congrats to Jia Min and Wei long for new paper accepted by Applied Physics Reviews! Keep up the good work!

Paper titled "Resolution and shape in bioprinting: strategizing towards complex tissue and organ printing".

Impact factor of Applied Physics Reviews: 12.894, Q1 journal.

Prof. Yeong gave Public Seminar at Tecnológico de Monterrey, Mexico

Prof. Yeong gave Public Seminar at Tecnológico de Monterrey, Mexico

February 03, 2019

Prof Yeong visited the and gave a public seminar on society 5.0 &3D Printing at the Tecnológico de Monterrey located in Mexico.

Best Oral Presentation Award at 2019 4th ICCMME

Best Oral Presentation Award at 2019 4th ICCMME

January 19, 2019

Congrats to Huang Sheng! He was awarded best oral presentation at the 2019 4th International Conference on Composite Material and Material Engineering (ICCMME) that is being held in Tokyo, Japan. Great job and keep it up!

Our research work is featured in 3DPrintingIndustry.com!

Our research work is featured in 3DPrintingIndustry.com!

January 07, 2019

Researchers from the Singapore Centre for 3D Printing School of Mechanical and Aerospace Engineering Nanyang Technological University have published a review summarising research on carbon nanotubes (CNT) and their use in 3D printing.

The research paper titled, Directed and On-Demand Alignment of Carbon Nanotube: A Review toward 3D Printing of Electronics, categorizes the alignment methods of carbon nanotubes and summarizes various applications of the material. Furthermore, the paper discusses how the material has been used to develop improved composites and how it can contribute to the development of future devices using 3D printing....

Find out more about the article using the link below.

Latest paper accepted by ACS Sensors

Latest paper accepted by ACS Sensors

December 17, 2018

Congrats to Shweta, Guo Liang, and Zhen Kai for new paper accepted by ACS Sensors! Keep up the good work!

Paper titled "Wearable Bandage based Strain Sensor for Home Healthcare: Combining 3D Aerosol Jet Printing and Laser Sintering". (Impact factor of ACS Sensors: 5.711, Q1 journal.)

The paper is available at link below:

Latest paper accepted by Advanced Materials Interfaces

Latest paper accepted by Advanced Materials Interfaces

December 11, 2018

Congrats to Guo Liang and Shweta for new paper accepted by Advanced Materials Interfaces! Keep up the good work!

Paper titled "Directed and On-demand Alignment of Carbon Nanotube: A Review Towards 3D Printing of Electronics".

The paper is available at link below:

Latest paper accepted by Critical Reviews in Solid state and Materials Sciences

Latest paper accepted by Critical Reviews in Solid state and Materials Sciences

November 15, 2018

Congrats to Guo Dong, Swee Leong, Joel, Guo Liang and Yee Ling for new paper accepted by Critical Reviews in Solid state and Materials Sciences! Keep up the good work!

Paper titled "Process-structure-properties in Polymer Additive Manufacturing via Material Extrusion: A review". available at

Our research work is featured in 3DPrint.com!

Our research work is featured in 3DPrint.com!

November 12, 2018

The article title reads, "Adjusting the Design, Material, and Parameters of a 3D Printed Strain Gauge with Computational Simulation".

A trio of researchers from the Singapore Center for 3D Printing at Nanyang Technological Universityrecently published a paper, titled “Aerosol Jet Printed Strain Sensor: Simulation Studies Analyzing the Effect of Dimension and Design on Performance,” about their work in using computational simulation to adjust the design, material, and parameters of a 3D printed strain gauge made with aerosol jet technology...

Find out more about the article using the link below.

Giving a 3D printing workshop on inaugural Transform MedEd oconference jointly organised by LKC-imperial college

Giving a 3D printing workshop on inaugural Transform MedEd oconference jointly organised by LKC-imperial college

November 08, 2018

We are happy to be part of the HP-NTU digital manufacturing Corp lab

We are happy to be part of the HP-NTU digital manufacturing Corp lab

October 22, 2018

Latest paper accepted by IEEE Acess

Latest paper accepted by IEEE Acess

October 14, 2018

Congrats to Shweta and Guo Liang for new paper accepted by IEEE Access! Keep up the good work!

Paper titled "Aerosol Jet Printed Strain Sensor: Simulation Studies Analyzing the Effect of Dimension and Design on Performance ".

Congratulations to Swee Leong for publishing a book!

Congratulations to Swee Leong for publishing a book!

October 01, 2018

Book Title: Selective Laser Melting of Novel Titanium-Tantalum Alloy as Orthopaedic Biomaterial

Available at:

A new patent application has been filed!

A new patent application has been filed!

September 26, 2018

Congrats to Eric, provisional USA patent application has been filed on Silicone Meniscus With Slow-Released Mechanism. This work will be useful for meniscus-related therapies and treating sports injuries.

Filing date: 17 Sep 2018.

The latest round of high cited papers for May/June 2018 at Web of Science

The latest round of high cited papers for May/June 2018 at Web of Science

September 26, 2018

We have 6 highly cited papers for May/June 2018. Highly cited papers refer to top 1% of paper in respective field.

Featured project at CSIRO ASEAN HUB launching event

Featured project at CSIRO ASEAN HUB launching event

September 26, 2018

In-situ alloying using SLM and DED was selected as one of the projects highlighted during the CSIRO ASEAN Hub launch event (17 September 2018). The hub facilitates CSIRO's science, commercial and research for development engagements across Singapore, Indonesia, Vietnam, Thailand, Malaysia and Philippines.

TechInnovation 2018

TechInnovation 2018

September 26, 2018

In-situ alloying using SLM was featured at NTUititve's booth at the event (18-19 September 2018).

This technology is offered on IPI SG.

Great results from our URECA student at the 2018 Discover URECA Poster Competition

Great results from our URECA student at the 2018 Discover URECA Poster Competition

August 16, 2018

Congrats to URECA student, Lee Yi Wei, for achieving second place in Engineering Category of the 2018 Discover URECA Poster Competition!

Latest paper accepted by Advanced Materials Technologies

Latest paper accepted by Advanced Materials Technologies

August 15, 2018

Congrats to Guo Dong, Shweta, Yee Ling for new paper accepted by Advanced Materials Technologies! Keep up the good work!



Paper titled "Recent progress in Additive Manufacturing of Fiber Reinforced Polymer Composite"

Invited talk at the 20th Annual SME Conference

Invited talk at the 20th Annual SME Conference

August 13, 2018

Prof Yeong will be giving a talk at the conference on 15 August 2018, organised by Singapore Chinese Chamber of Commerce and Industry.

Topic: "How to be a smart factory of tomorrow"

Click the link below for more information.

Latest paper accepted by International Journal of Refractory Metals and Hard Materials

Latest paper accepted by International Journal of Refractory Metals and Hard Materials

August 12, 2018

Congrats to Swee Leong for new paper accepted by International Journal of Refractory Metals and Hard Materials! Keep up the good work!

Paper titled "Selective laser melting of titanium alloy with 50 wt% tantalum: Effect of laser process parameters on part quality".

Prof Yeong and team is happy to be shortlisted for the Science award by Lush Prize 2018

Prof Yeong and team is happy to be shortlisted for the Science award by Lush Prize 2018

August 07, 2018

The Lush Prize is a major initiative aiming to bring forward the day when safety testing takes place without the use of animals.

This year 56 projects and scientists from 17 countries made it through to the final judging process.

Check out The Lush Prize website below for more info.

Congrats! Dr Ng and Dr Lee!

Congrats! Dr Ng and Dr Lee!

July 25, 2018

We have 7 highly cited papers for March/April 2018!

We have 7 highly cited papers for March/April 2018!

April 29, 2018

Check out the list at the publication page

We are happy to host the summer class of 2018 on Bioprinting

We are happy to host the summer class of 2018 on Bioprinting

July 18, 2018

39 Students from 9 countries and across all disciplines are attending the summer class by Prof Yeong.

Paper accepted for publication in International Journal of Bioprinting

Paper accepted for publication in International Journal of Bioprinting

June 24, 2018

Our latest paper, "3D Bioprinting Processes: A Perspective on Classification and Terminology" has been accepted for publication in International Journal of Bioprinting! Congrats Swee Leong!

Showcasing our technology to the PM of India

Showcasing our technology to the PM of India

May 31, 2018

Our work on 3D Printing was selected as one of the most promising upcoming technologies, to be showcased to Prime Minister of India, His Excellency Narendra Modi, on his visit to NTU on 1 June 2018.

Dr. Shweta exhibited the innovations in 3D printing technology.

Prof Yeong Research Group Meeting

Prof Yeong Research Group Meeting

May 23, 2018

We had a awesome time at our group sharing, followed by a sumptuous buffet lunch!

Just accepted paper in MRS Advances

Just accepted paper in MRS Advances

May 16, 2018

We have a new publication on Bioelectronics “3D printed Bioelectronics Platform with Embedded Electronics” in MRS Advances. Congrats to Dr. Shweta and team.



Available online at:

Progress in Additive Manufacturing Conference 2018

Progress in Additive Manufacturing Conference 2018

May 14, 2018

We are organising and enjoying the Pro-AM conference at NTU Singapore. Well done to the team!

We were at LKCMedicine Anatomy Challenge 2018!

We were at LKCMedicine Anatomy Challenge 2018!

April 20, 2018

Thank you Lee Kong Chian School of Medicine for inviting us to this event. We had a great time sharing our knowledge and experiences with 3D printed biomodels with the participants and students!

Click on the link below to visit their FB page:


Dr. Shweta gave a talk on “3D Printed Bioelectronics Platform with Embedded Electronics” in 2018 MRS Spring Meeting & Exhibit at Phoenix, USA.


Dr. Shweta gave a talk on “3D Printed Bioelectronics Platform with Embedded Electronics” in 2018 MRS Spring Meeting & Exhibit at Phoenix, USA.

April 22, 2018

A round of applause for Jia Min for successfully defending her thesis today! Congratulations for the great work, Dr Lee!

A round of applause for Jia Min for successfully defending her thesis today! Congratulations for the great work, Dr Lee!

April 17, 2018

Channels News Asia (CNA) showcased our 3D printed multi-material biomodel technology!

Channels News Asia (CNA) showcased our 3D printed multi-material biomodel technology!

March 13, 2018

Challenge Tomorrow, a documentary series on Channel News Asia, presented our specially designed and fabricated multi-material biomodel on their latest episode!

As a project done with Lee Kong Chian Medical School, we 3D printed biomodels to replace the use of cadavers in the training and education of future doctors to a great success!

The Straits Times featured our bioprinting technology of pigmented skin.

The Straits Times featured our bioprinting technology of pigmented skin.

March 01, 2018

Congrats to Wei Long for getting featured on Straits Times for his 3D printed skin innovation. Article titled "NTU scientists print human skin that matches natural pigment" is published on 2 March 2018. </